Summary: In your project's sketch scene, click "Pins" on the upper toolbar. Select a pin from the Material Items drawer on the right, and click on your project image to place that pin. Additional clicks will place additional pins.
Double click on any pin to tag notes or photos to the pin.
Pins allow you to create a site map of roofing penetrations and estimate items like plumbing boots, off-ridge vents, skylights, and chimney flashing. You can also use pins to show damaged areas and attach inspection notes and photos.
To attach notes and photos to any pin, double click the pin on the sketch. Click anywhere in the gray area to open the saved files on your device and select a photo to upload. Add notes on the line and click "Close" in the bottom right to save.
The site map and any uploaded notes or photos are visible on the last two pages of the Sketch Report.
Be sure to generate updated documents after making any changes to the sketch.
Watch the video below to see the process:
Note: Pins can have materials and services attached that will show up on estimates and material orders. For help configuring your materials, schedule an Account Setup meeting with our team.