Generate a Snap Estimate based on square area measurements in just a few clicks! For an overview of Snap Estimating, click here.

Snap Estimates do not require exact measurements and allow you to input an estimated square area value for an immediate quote. 

1. Create a Snap Estimate from scratch - based sole on your estimated squares. Once you confirm measurements via our ordering service, a DIY project or on site, you can recalculate your quote using the updated area measurements.
2. Using the measurements from your existing DIY project or completed Measurement Order, generate a per-square Snap Estimate

Create a Snap Estimate From Scratch

1. Click the green + Add New button in the bottom right corner of your projects screen.
2. Select Create a Project, input your address details and click Create in the bottom right.
3. Under the Estimates section in your project page, click the Snap Estimate option.
   • Select your roofing material from the New Roof Material drop down.
   • Input your estimated squares or copy over the value from the Measurements tab of your project.
   • Add an optional description or note.

   • Input your per square price.

     

4. Click Save, which will then generate your estimate. Tap on the gray ⋮ and select Edit Estimate to view a suggested itemized breakdown and price range.

   

Optional: Side-by-Side Comparison

You can create up to 5 different Snap Estimates to compare side-by-side, using different materials, per-square price points, or by modifying the material type within the estimate itself. Just click the + Add button in the bottom right of the estimates section and select Per-Square Estimate.

Next Steps → How to Modify Your Snap Estimate

Create A Snap Estimate Within An Existing Project

1. If you have an existing DIY project or Measurement Order, click to open the project from your main projects screen.

2. Scroll down to the Measurements section, and tap the grey ⋮ then select Measurements:

   

3. Note the values under either Actual Squares or Total Squares (which includes your suggested waste percentage). You'll need these for the Snap Estimate.

   

4. Under the Estimates section in your project page, click the Snap Estimate option.
   • Select your roofing material from the New Roof Material drop down.
   • Input your estimated squares or copy over the value from the Measurements tab of your project.
   • Add an optional description or note.

   • Input your per square price.

     

5. Click Save, which will then generate your estimate. Tap on the gray ⋮ and select Edit Estimate to view a suggested itemized breakdown and price range.

   

Optional: Side-by-Side Comparison

You can create up to 5 different Snap Estimates to compare side-by-side, using different materials, per-square price points, or by modifying the material type within the estimate itself. Just click the + Add button in the bottom right of the estimates section and select Per-Square Estimate.

Next Steps → How to Modify Your Snap Estimate

If you have any issues generating your Snap Estimate, we're happy to help! Contact us at support@roofsnap.com.

Additional Resources:

Verify Your Measurements

• Sketch the roof using our in app tools (DIY)
• Order a report through our Measurement Ordering Service

Customize Your Materials & Pricing For Detailed Estimation

• Configure your materials & pricing
• Guided walkthrough of estimating set up
• Book a meeting with an expert

Generate Professional Documents

• Material Orders
• Single Detailed or Comparison Estimates
• E-Signable Contracts
• Project Summary Reports